2007-09-07 23:51:44 · 7 answers · asked by harryarmy 2 in Cars & Transportation ➔ Car Makes ➔ Nissan
Possibly low/no oil.
2007-09-07 23:58:22 · answer #1 · answered by monsewer icks 4 · 1⤊ 0⤋
Some times people put additives in there oil and the paint inside the oil pan comes off and plugs the oil pump pick -up screen. Drop the oil pan first while there look at a main bearing and rod bearing. Trying to drive it with out oil pressure could have killed the engine.
2007-09-07 23:57:53 · answer #2 · answered by John Paul 7 · 0⤊ 1⤋
Oil pressure reading will depend on the oil pump which apparently is NOT pumping oil. Start by changing the oil pump. Pressure should read 30-40 pound, again depending on the pump. Ask your local mechanic
2007-09-07 23:57:15 · answer #3 · answered by Anonymous · 0⤊ 0⤋
I also had a Skylline, with the same problem.
I replaced the oil pump - screen
new oil and a filter
Just to realize that it was a loose wire to the sending unit.
so a .25 cent electrical connection later I was off.
2007-09-08 00:56:13 · answer #4 · answered by cgriffin1972 6 · 0⤊ 0⤋
It will probably need a new sender.it,s not usually the gauge...check the oil level,check below for leaks,you may as well do an oil and filter change at this time.
2007-09-07 23:58:03 · answer #5 · answered by Anonymous · 0⤊ 0⤋
it may have 2 reason :
1. oil filter is not OK .
2. oil pressure switch is wrong.
2007-09-08 00:11:47 · answer #6 · answered by abolfazl_simorgh 1 · 1⤊ 0⤋
youve scrapped it... the oil pump has failed... or the scavenge side of the pump is blocked... either way, dont run it....
2007-09-08 00:06:11 · answer #7 · answered by Anonymous · 0⤊ 1⤋