I want to make a FM receiver to operate in the ranges of television audio, but I'm not sure if it is even possible to listen to television that way. My objective here is to be able to watch tv with the sound turned down while listening through headphones on the receiver. I don't have a headphone jack on my television so if you can think of any other way I'd like to hear it. Plus I've already built an ear amplifier but that really wasn't what I was going for. By the way, I ordered samples of the MAX2607 (150-300MHz), the MAX2608 (300-500MHz), and MAX2609 (500-650MHz).
2007-09-07 08:24:22 · 4 answers · asked by Anonymous in Consumer Electronics ➔ Other - Electronics
It may be simpler to just install a headphone jack, or a simple audio output in your TV. A simple mechanical switch could turn the speaker audio off while it sends it to your receiver.
2007-09-07 14:14:59 · answer #1 · answered by TV guy 7 · 0⤊ 0⤋
yes some tvs have audio out. use that.
Some radios already pick up TV stations.
Use an FM transmitter. Like the ones for IPOD Then use a portable radio.
2007-09-07 15:33:38 · answer #2 · answered by Tino 4 · 0⤊ 1⤋
It is very possible. If you happen to have a channel 6 (over the air) in your area, tune your fm radio to like 87.7 or 87.9. Channel 6 can be heard on one of those FM frequencies.
2007-09-07 17:26:35 · answer #3 · answered by top40oldies 2 · 0⤊ 0⤋
Yes of course it is.
In the U.S. the sound carrier is 4.5MHz higher than the video carrier of any channel.
2007-09-07 17:58:07 · answer #4 · answered by dmb06851 7 · 1⤊ 0⤋