The Ilford film I am using is Pan F Plus ISO 50, and I use D 76 to develp my Kodak T-Max rolls.
2007-09-07 07:58:59 · 7 answers · asked by wizehuman 2 in Arts & Humanities ➔ Visual Arts ➔ Photography
B&W process is pretty straight forward. You should have instructions with your D-76.
If not, the fact sheet from the Ilford website has the information you need.
http://www.ilfordphoto.com/products/product.asp?n=5&t=Consumer+%26+Professional+Films
2007-09-07 08:20:10 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Yes you can do that. Check the chart inside the film box or the developer box tos ee the developing times for Ilford and the ISO you have.
2007-09-07 15:11:36 · answer #2 · answered by Michael M 5 · 1⤊ 0⤋
The chemical content of D76 is widely known and published.
Ilford has even copied this formula and sells it under their own label as Ilford ID-11.
I personally make my own D76 from chemicals purchased in bulk. The price of two one-liter packets of D76 will get you all the chemicals you need to make at least 10 separate 1-liter batches.
2007-09-07 16:04:29 · answer #3 · answered by Ben H 6 · 0⤊ 0⤋
No problem.
You may have to adjust the time a bit, so shoot some test shots first. Better yet, do a Zone calibration
2007-09-07 15:14:53 · answer #4 · answered by dogsafire 7 · 0⤊ 0⤋
film developers are universal for all conventional films.
2007-09-07 15:13:17 · answer #5 · answered by simha1950 2 · 1⤊ 0⤋
There are 2 processes....C41 for negative and E6 for positive
2007-09-07 15:10:27 · answer #6 · answered by dVille 4 · 0⤊ 1⤋
Havn't done it for awhile but in the back of my mind the answer is yes....
http://www.ilford.com/#
2007-09-07 15:04:16 · answer #7 · answered by Anonymous · 0⤊ 0⤋