English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

The blinkers on my '05 jeep wrangler have quit working and I can't figure out why. I have already checked the bulbls and fuses and wires. My dad says that I might have blown a relay, but I can't find one for the blinkers, or flashers(hazard lights). Can some one please help me?

2007-09-05 06:10:51 · 2 answers · asked by doublebarrel_byrd 1 in Cars & Transportation Car Makes Jeep

2 answers

First have you checked ALL the fuses? I was blowing a fuse for my blinkers that was labeled under something I would have never thought of. It is in the box under the hood on the right side of the engine. If I remember right it will be a 20 amp fuse. If that is not it then the relay is in the steering column on the newer Wranglers. Take off the cover that surrounds the column and it will be a square relay on the top side of the column. Good luck!

2007-09-05 14:47:17 · answer #1 · answered by BlueJeeper 2 · 0 0

Flasher for the blinkers is probably bad---usually mounted by the fuse block under the dash. It looks like a little round plastic or metal cylinder with two or three terminals. Buy one at a parts store so you'll know what to look for---may look like this one
http://images.search.yahoo.com/search/images/view?back=http%3A%2F%2Fimages.search.yahoo.com%2Fsearch%2Fimages%3Fp%3D%2Bturn%2Bsignal%2Bflasher%26ei%3DUTF-8%26fr%3Dks-ans%26x%3Dwrt%26js%3D1%26ni%3D21&w=363&h=270&imgurl=tech1autorepair.com%2Fparts%2Fturn_signal_flasher.jpg&rurl=http%3A%2F%2Ftech1autorepair.com%2Fparts%2Fturn_signal_flasher.htm&size=25kB&name=turn_signal_flasher.jpg&p=turn+signal+flasher&type=jpeg&no=2&tt=357&oid=de09f8275eb1e488&ei=UTF-8
Turn signals and hazards use two different flashers--make sure it's the one for turn signals.

2007-09-05 14:06:30 · answer #2 · answered by paul h 7 · 0 0

fedest.com, questions and answers