im planning on buying a 1990 mustang hatchback but the current owner states that the cars rack and pinion are shot. now i know that the rack and pinion deal with the steering of the car but i don't exactly know where they are or how they work. so how hard/how many things will i have to unbolt to change it. Also how much hp does a 1990 mustang hatchback with BBK headers have?
2007-09-03 15:22:27 · 4 answers · asked by monstermott2002 1 in Cars & Transportation ➔ Car Makes ➔ Ford
I just changed mine on my 88 5.0 LX about a month ago. You have to remove the tierod ends from the spindles and the lines from the rack and pinion before removal. Then just 2 bolts hold the unit to the chassis. It is a little tight coming off, but it will come out. You must then remove the tierod ends and sleeves from the old unit and transfer them to the new one. Try to measure them so that the alignment will be fairly close so you can drive it to the alignment shop when you get the new one on.
The follow the bleeding procedures that come with the new unit after installation to keep the pump from being noisy and having air in the system.
About 215hp.
2007-09-05 20:02:33 · answer #1 · answered by Anonymous · 0⤊ 0⤋
its a pretty good little job if you haven't ever did it before,you need to get it high enough in the air to work on,you also have to remove both front wheels and disconnect everything on the rack to get it off,and you will need some help with it,its not an easy job to do by your self,you can probably do this ,but get someone to help you with it,good luck on it.
2007-09-03 22:28:19 · answer #2 · answered by dodge man 7 · 0⤊ 0⤋
if you're not a mechanic, and haven't the right tools, ex: a
good drive set, a lift/ramps....don't even bother trying it yourself.....as for hp...you would have to know the size of the
engine, what it was rated from the factory, etc.....
2007-09-03 22:27:47 · answer #3 · answered by evensout 3 · 0⤊ 0⤋
it will be really hard. dont even try.
2007-09-03 22:25:27 · answer #4 · answered by Anonymous · 0⤊ 0⤋