2007-09-02 12:41:05 · 6 answers · asked by Jesse h 1 in Cars & Transportation ➔ Car Makes ➔ Ford
call an auto parts store but I assume it's 0.35 on the plugs, thats what all the old cars were until they came out with electronic ignition in 1975.
2007-09-02 12:47:13 · answer #1 · answered by mister ss 7 · 0⤊ 0⤋
The ignition coil supply the juice to bridge the hollow. the motor vehicle producer is conscious what coil he placed on the engine. He recommends the hollow to be wider because of the fact he's conscious the coil will produce adequate juice to create the superb possible spark for his designed engine. The spark plug manufacterer won't be able to probable understand what engine his plugs are going into, so how can he provide a sturdy suggestion for hollow. replace the hollow to cautioned, yet be careful, those high priced plugs have suggestion that injury off somewhat.
2016-12-12 16:28:17 · answer #2 · answered by Anonymous · 0⤊ 0⤋
As I recall, all the plug gaps were around .034-.036" When you change the points, try and find a set of cross cut points. They always gave me the best performance and lasted the longest, since they ran cooler they didn't burn up as fast.
good luck.
2007-09-02 17:45:11 · answer #3 · answered by Fordman 7 · 0⤊ 0⤋
A stock 66 200 ci is a inline six and the plug gap is 0.035"
points are 0.025", (THAT'S THOUSANDTHS NOT HUNDREDTHS)
New ones come preset, just check them. If the old ones need adjusting, then they are worn and you need new ones.
timing set at 10 BTDC unless it pings, then 6
2007-09-02 15:47:08 · answer #4 · answered by ClassicMustang 7 · 1⤊ 0⤋
Call the auto parts store
2007-09-03 01:35:10 · answer #5 · answered by nbr660 6 · 0⤊ 0⤋
.034
www.autozone.com has repair and tuneup info for your car.
2007-09-02 12:52:40 · answer #6 · answered by R1volta 6 · 0⤊ 0⤋