That is on the sidewall of the tire.
2007-09-05 22:03:56
·
answer #1
·
answered by Anonymous
·
0⤊
0⤋
The minimum would be if the Bn CO "sets aside" the punishment. The Bn Cdr has alot of options, he can give immediate punishment, he can suspend individual parts of the punishment or just not give you any punishment. I find it hard to believe that a Battalion Commander would have such a policy, unless the Bn as a whole has had a huge number of appts missed. However, 99% of the time, when a Field Grade Art 15 is given, the max punishment is ordered. Edit: @USAFisnumber1, Obviously, you are not an Officer. Otherwise, you would know, that there is a thing called a Summary Courts-Martial that is not authorized to administer a punitive discharge. Yes, the punishment is steeper than an Art 15 but not by much. However, confinement is a punishment option with a SCM. The command choses this route about 50% of the time
2016-05-19 02:16:44
·
answer #2
·
answered by ? 3
·
0⤊
0⤋
each tire is different. my drag slicks are best at 12 psi. my street tires are 35 psi. max rating is usually on the tire sidewall. i usually stick with the car manufacturers rating found in the door jamb or owners manual. i bet 30-35 is going to be in the ballpark.
2007-09-02 01:18:39
·
answer #3
·
answered by chevy_man_rob 5
·
0⤊
0⤋
The correct pressure if different on car and truck models.The owners manual is the best place to look.If you have no manual the dealer can answer your question.Tire pressure is very important so get it right to stop tire problems down the road.
2007-09-02 14:37:03
·
answer #4
·
answered by HyperGforce 7
·
0⤊
0⤋
Most likely it should be 35 psi.
But if your not sure check the door plaquer (sticker on driver door jam) or the tires themselves (on the side walls)
2007-09-03 15:20:30
·
answer #5
·
answered by Feather 3
·
0⤊
0⤋
This gets confusing. My Ranger pick-up tires say 35 but the owners manual says not over 32 for optimum ride. Called a few tire retailers and they are as confused as I am.
2007-09-02 07:05:24
·
answer #6
·
answered by sensible_man 7
·
0⤊
1⤋
look on the tire ..the inflation levels should be next to the size ..
2007-09-05 07:23:26
·
answer #7
·
answered by Jackofalltrades216 4
·
0⤊
0⤋
if they are low profile 30psi
2007-09-01 23:44:30
·
answer #8
·
answered by Anonymous
·
0⤊
0⤋