Where is the air chamber exhaust port? It says to apply oil there every 1,000 shots but there's no diagram to show where it is.
2007-08-30 10:16:01 · 2 answers · asked by Jim 3 in Sports ➔ Outdoor Recreation ➔ Hunting
At the front of the cylinder, matching up to the rear of the barrel.
With the butt down, break the barrel and c ock the gun. Look at the surface where the back of the pellet would be if you loaded it and closed it, there's a hole there and it leads straight into the front of the cylinder, that is the air chamber exhaust port. The steel isn't very thick, so if you drip some lubricant in there it goes straight into the cylinder.
I have the 94, but it's just the same. In this way all the break barrel spring air guns are the same.
2007-08-30 19:21:43 · answer #1 · answered by Chris H 6 · 0⤊ 0⤋
"air chamber exhaust port" - I think what you're looking for is the "compression chamber port" >You should have a needle applicator for this(about 3 inches long)
Jim, the e-mail should have explained everything, if I can be of any further help, don't hesitate.
2007-08-30 21:28:10 · answer #2 · answered by C_F_45 7 · 0⤊ 0⤋