i Have a 99 jeep wrangler sahara. i have a 4inch rough country lift. i want to put on 33 inch wheels can i mount them on my stock rims
2007-08-26 10:57:04 · 5 answers · asked by josh 1 in Cars & Transportation ➔ Car Makes ➔ Jeep
While they will fit..These tires are usually 12.5 inches wide and not 11.5, which is common for the 32" tires. Your tires will bulge in the center with such narrow wheel, so do not air up high or it will be much worse on contact area.
Rubbing could be a problem in front at full turn, but unless you have the Dana 44 axles, I am more concerned about the axles and spider gears than I am rubbing on off road work.
Good Luck
2007-08-27 03:37:39 · answer #1 · answered by Anonymous · 0⤊ 1⤋
You can fit 33x11.50 on stocked rims, but you will have to get at least 1" spacers to keep the tires from scrubbing when turning. Also, you can fit 33x12.50 on a stocked rim, but they will have more of a balloon look to them and you will have even greater scrubbing, and the tires may scrub the rear springs. (for the 33x12.50, I would recommend at least 15x10 rims). Your stocked rims are 15x8. (((they do make 33s in 10.50 and 11.50))).
2007-08-27 05:15:21 · answer #2 · answered by Çåŗőľîņẫ§ħŷġĭ®ł 5 · 0⤊ 0⤋
I have 34 on my diesel dodge04.5== 12.5 wide stock rims 2" lift tight turns they rub a bit inside. You should do fine run lower air pressure or you will ware the centers out>
2007-08-26 11:41:01 · answer #3 · answered by 45 auto 7 · 0⤊ 0⤋
33x10.50 or 33x11.50 should fit just fine any wider tire and they will rub on the front positions. I would use offset wheels for any wider tires, but some like to use wheel spacers.
2007-08-26 11:23:42 · answer #4 · answered by cadirtrider 2 · 0⤊ 0⤋
check this link its good
http://buyingandsellingshares.blogspot.com/
.
2007-08-27 02:45:29 · answer #5 · answered by Anonymous · 0⤊ 1⤋