Asus p4c800 deluxe probelm?
Hi,
I tried the monitor on another PC and it works correctly VGA and DVI
connections.
I tried what you said but, without memory the PC doesn't start and I hear
long beep and two shorts beeps continuously.
So I tried to install just one memory bank.
In the first and second slot the pc doesn't start, in the third and fourth
the pc start ...
So I connect DVD and HD to try it ...
When I start the pc I received messagge "overclocking failed press F1 to
enter to setup or press F2 to load default parameters".
Press F2 Windowx XP start up and I started CPU-ID.
You can see the result in the image ...
The motherboard work ad 100 mhz and not at 200 ... so CPU 1300 until 2600.
I tried to modify BIOS parameters without result, every time I restart the
PC I received the error "overclocking ...".
If you have suggestions ...
2007-08-22 06:39:14 · 1 answers · asked by jess7hk 1 in Computers & Internet ➔ Hardware ➔ Other - Hardware
you have been messing about with the systems timing.. go into the bios and reset the system to fail safe...(default setting) then reboot the system
if you have tried to over clock your system CPU you may have burned something out... if it does not start in failsafe setting you have...
and if you have tried to over clock.. you never get more than 1.5% more anyway. so that is a wast of time.. when the results can be a systems burn out
2007-08-22 06:52:37 · answer #1 · answered by Carling 7 · 0⤊ 0⤋