Boost problems with gizzmo ibc?

Question

Ok heres whats up. I bought gizzmo ibc off ebay hooked it all up its pretty much the same as my turbosmarts single stages old set up. It will give me no more than 7.6psi - I have put all 4 memories gains at diferent levels i.e 25 50 70 90 and they all give me 7.6 psi. now I have gone over it 20 times no leaks in hoses vaccuums from actuator to solanoid to fmic hot pipe which line is about 6 inches long the set up is internal wastegate and the numbers on the solanoids in and out are positioned correctly. Heres what I did - earthed the solanoids earth wire directly to body and it will run 20psi plus and can not turn it down, blew hose off front mount, and I never done it again. Is it stuffed or what any help would be appreciated as i am missing 15psi usual up grades to get 176rwk safely its got t28 and it is a red top sr20det go easy on me im a newbie to the forum but not to my 180.

Thanks

Answer 1

Sounds like something is fundementaly wrong with the boost control inside you can look at how the unit is working with a dwell meter as it turns on and off the steeper motor boost solonid. Next time Greedy or Apex-i neo.