English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I fitted a new lock,but there were no instructions on how to set your own lock code of 3 numbers.First I was happy with 000 ,the lock opens on that unless you change it.I flipped the little button inside the clasp from A to B(or B to A) while attempting to set code 462.Now it is total Fort Knox,no code opens it,travelling in 2 days,help!

2007-08-21 05:58:01 · 3 answers · asked by traceline89 1 in Travel Travel (General) Packing & Preparation

3 answers

Trial and error. If you start at 000 it wont take that long to try every number. You should open it within an hour or so.

2007-08-21 06:36:12 · answer #1 · answered by JuanB 7 · 2 0

You don't say if the lock is fitted to the suitcase, or if it is a "freestyle" lock.... If you have fitted (i.e. replaced) the original samsonite lock, check your work. It could be that something has slid out of place and sealed the lock.

If you have replaced the old lock with another samsonite one, I'd suggest saving your time, and call the nearest Samsonite distributor to see if they have something akin to a "master key" which may get you out of trouble.

If the new lock is TSA approved, you may be able to get help from a department store, if they have the overriding tool which these locks depend upon.

Other than that, try and find a friendly locksmith or keycutter who may be able to either break the lock, disassemble it or otherwise let you in.

Good luck and happy travelling!

2007-08-22 02:13:04 · answer #2 · answered by geordiegadgets 2 · 0 0

937

2016-05-18 23:52:52 · answer #3 · answered by ? 3 · 0 0

fedest.com, questions and answers