English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

One of my wall outlets is starting to send out sparks whenever I plug or unplug anything from it. I use three prong progs. Does this mean the outlet is going bad. It scared me to death I thought I was going to get electricuted.

I am nervious now to unplugg anything from that outlet I think I wll just leave it alone. Anyone have any advice?

2007-08-20 19:06:58 · 4 answers · asked by Anonymous in Consumer Electronics Other - Electronics

4 answers

Most wall sockets show a spark when an appliance such as an electric heater is pulled out of the socket , the spark is called " back emf " and is normal . However if your appliance is switched off with its own switch before pulling it out and it still sparks then get an electrician to check it out.
Cheers Pete

2007-08-20 19:38:14 · answer #1 · answered by Realist 2006 6 · 1 2

If the item you're plugging in is "on" you're seeing the preliminary "surge" of cutting-edge leaping the contacts. attempt plugging them in together as in the "off" place. If the "spark is merely incredibly substantial it incredibly is common as some products (TVs, DVD gamers, and such) use a small volume of power all of the time. this permits them to come back on on the instant, look after memory function and the exhibit. to be sure this, take a small lamp eliminate the bulb and plug it in. There could desire to be no spark in any respect. Then positioned the bulb decrease back in. lower back, shouldn't spark. Then turn it on and plug it in. See the version? If that may not the reason then you definately probably have a unfastened/corroded connection at your panel or in all hazard on the meter. attempt turning off all of the circuits to affected receptacles. look at the "area" of the breakers you have grew to become off. commencing on the impressive say "A", "B", A, B as you bypass down the line on each finished sized breaker. in case you bump into a double breaker do not count form it as a million, it incredibly is 2 areas. If the affected circuits are all on the comparable "letter" (area) then you definately've a topic with that leg. If not, then the subject could be with the impartial connection. commence by ability of calling the flexibility business enterprise to verify their end of the provider. they won't fee for doing this. If that doesn't yield an answer then it's time to call an Electrician. you may do properly to not attempt and fasten this your self. way too hassle-free to get heavily harm of killed working interior an energized (warm) panel. evaluate the fee of a provider call "money properly spent"

2016-10-16 07:45:07 · answer #2 · answered by ? 4 · 0 0

It is due to loose connection.One of the three pins(particularly phase and neutral) may be making a loose contact or the inside wire connection to the phase or neutral pin might have become loose.These are the only two reasons for the sparking.If you are not able to fix it,call an electrician.

2007-08-20 20:13:19 · answer #3 · answered by Arasan 7 · 1 1

DON'T USE IT! Call an eletrician or move out of the trailer.

2007-08-20 19:17:02 · answer #4 · answered by Anonymous · 0 2

fedest.com, questions and answers