i know the standard for sub enclosures are 3/4' MDF with 3/8" plexi... but i was wondering if i could get away with putting 1/4" plexi instead to save some money. does it make that big of difference between the two sizes?
2007-08-19 11:54:20 · 6 answers · asked by juventusdefender 2 in Cars & Transportation ➔ Car Audio
Thickness with any enclosure depends on the overall area of the pieces. The larger they are, the more the need for thickness. What you are trying to avoid are the pieces flexing. This can also be minimalized by adding internal braces.
1/4" plexi should be okay if it is a small piece.
2007-08-19 12:08:13 · answer #1 · answered by Anonymous · 1⤊ 0⤋
I fantastically recommend you reside remote from bandpass. Ported would be a much better option for the kind-Rs and deep bass. There a pair of motives I recommend to stay remote from bandpass. the 1st is that banpdass is in simple terms going to paintings for an exceedingly small variety of frequencies. they don't look to be going to be sturdy for sound high quality purposes and could not sound the main suitable for many varieties of music. Above became approximately banpass enclosures frequently, for the kind-Rs there is not any income of going with a bandpass enclosure. the kind-Rs do not paintings that properly in a bandpass enclosure. the sole thank you to get them to produce greater output then a ported enclosure is to make the frequency variety very narrow. So your sub would be very loud at an exceedingly small variety of frequencies and be truthfully filtered out at something. The even worse element approximately that's that the narrow frequency variety that the sub performs should not be deep bass. so which you does not get any deep bass on the enclosure I defined above. you should custom layout an enclosure to hit the low-end frequencies. despite the fact that, then your output would be much less the a ported enclosure. So all in all. ported is a thank you to bypass. in case you music the enclosure low you will get super low-end reaction from the kind-R 15s. sturdy success!!!
2016-11-12 22:42:17 · answer #2 · answered by Anonymous · 0⤊ 0⤋
well check these out if you get a smaller glass then is going to rattle when you put the volum up and its going to make it sound nasty or more of a flat respons its better the size it was ment to have trust i try it.
2007-08-22 21:43:39 · answer #3 · answered by Anonymous · 1⤊ 0⤋
THINNER MORE FLEX LESS BASS AND ONLY MEDIUM DENSITY PARTICAL BOARD? solid bass requires strong building materals
2007-08-19 12:07:04 · answer #4 · answered by John Paul 7 · 1⤊ 0⤋
go with the half inch it will give u more bass and less vocals
2007-08-21 09:16:40 · answer #5 · answered by Anonymous · 0⤊ 0⤋
i agree wtih snoopy
2007-08-23 08:54:37 · answer #6 · answered by Anonymous · 1⤊ 0⤋