l have a raven mp25?

Question

is 7rd pistol and l cant shoot it l dont know why and l tock out the slide and l so in the spring a heavy grease and the spring was like stock . so every time l a try to shoot it ,some time the pin dont shoot and some time the pin hit the bullet pu t it dont shoot what do u think?? but the pin is not bend.

Answer 1

Firing pin may be worn or broken. The Raven pistol is a pot metel gun, and it is not designed to be shot a lot.

Answer 2

Sounds like whatever you used to lubricate or oil your pistol has thickened with age. If the firing pin spring is coated with this thick oil or grease it will stop the firing pin from striking the shell primer hard enough to fire.
The Raven is a very cheap gun and considered by many to be a "Saturday Night Special". It is poorly made. These guns have a reputation for problems and being totally unreliable. I won't even accept them in my shop to work on them when repairs are needed.

Answer 3

Clean it and re-oil this weapon it could very well be to dirty or fouled to allow the firing pin to reach the primer.
If this does not solve the problem then take it to a gunsmith to look it over and see what is the problem.

The only other problem would be broken firing pin or improper head spaced ammo.
You might also try another brand of ammo (name brand)

D58


Hunting with Rifle, Pistol, Muzzle loader and Bow for over 3 decades.
Reloading Rifle, Pistol and shotgun for over 3 decades.

Answer 4

You may have congealed oil gumming it up. Soak the whole pistol in solvent and blow it dry with air; sparingly and lightly oil moving parts and see if that works. Otherwise just use it for a paperweight on your desk. They were never made to really shoot more than a couple of rounds and you can't hit anything with them anyway; not to mention the fact that if you shoot somebody with a 25 you will probably make them very mad.

Answer 5

1) Step 1 - remove the magazine
2) lock the slide back
3) empty ammo from the magazine
4) slide magazine firmly back into weapon
5) release slide
6) Slowly drop hammer making sure not to shoot toe
7) Throw the weapon into fecal material receptacle.
8) Press left hand lever repeatedly until gone.

Answer 6

Use some WD-40 and get out all that heavy grease, and oil it down lightly with some good gun oil.

Answer 7

What? I can barely understand what you are saying here. Maybe you should spend more time in school and less time worrying about your gun.