English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I had a new battery installed and it activated the antitheft feature on my stereo. Does anyone know the best way to get the code needed to make it work again?

2007-08-16 05:14:04 · 4 answers · asked by djkolbe 3 in Cars & Transportation Car Audio

4 answers

you need an 'anti-theft' code to reactivate the radio. whenever the electrical power to the radio is interrupted the system "thinks" that the radio has been stolen and it goes into anti-theft mode.

if you purchased the car new, then you might find a white card about the size of a credit card with the owners manual or papers you received when you bought it. that card would have the anti-theft code on it.

if you can't find the card, call the dealer you bought it from. they may have the code on file from when they sold the car. however, most dealers only keep records for 7 years and often in remote storage locations so don't count on them having the code.

if you don't have the card, look inside the glove box for a white label about 1" long and 1/2" high. It may have two rows of numbers or just one. If it has two rows, the 5 digit number on the top is your anti-theft code. if it has one row of numbers about 9 charactors long, it is the serial number for the radio.

if you have only the serial number for the radio, you can call any Acura dealer, give it to them and ask them to look up the radio code on their Acura system. each radio code is specific to the serial number of the radio; there is no 'universal' code.

if you can't find the tag in the glove box, look under the rear trunk lid. if the car has an ashtray, pull it out and look at the backside or underside of the ashtray. the dealers put the tags in a variety of places when they did the initial inspection on the car.

if you can't find the tags, then try this. with the key in the igntion switch and the key ON but the rado turned OFF, hold in the station select buttons number 1 & 6 with your right hand. then, while holding those buttons in, turn the radio ON with your other hand. You should see a series of 5 charactors on the display starting with the letter U and followed by 4 numbers. write them down. then the display will change to a second set of 5 charactors starting with the letter L and 4 numbers. write them down. then call the honda dealer and give them those numbers--those numbers are the serial number of the radio.

if all else fails, the radio will have to be removed to get the serial number off of the manufacturer plate on the back of the radio. dealerships will not charge to retrieve the code for you but will charge to remove the radio.

hope that gives you some direction. I think you'll be able to get the radio activated again. one note--you have 3 shots to enter the code correctly or you'll get an error message. if you get that, disconnect the negative battery cable and leave it off for 3 minutes to clear the error mode. then reconnect the cable and you can then enter the code.

hope that helps

2007-08-16 05:27:13 · answer #1 · answered by honda guy 7 · 3 0

Acura Stereo Code

2016-12-14 03:51:07 · answer #2 · answered by ? 4 · 0 0

This Site Might Help You.

RE:
Acura 3.2TL Antitheft Codes???
I had a new battery installed and it activated the antitheft feature on my stereo. Does anyone know the best way to get the code needed to make it work again?

2015-08-07 06:32:51 · answer #3 · answered by Anonymous · 0 0

Once you get the code if you're going to try it yourself you have to pull the antenna lead out of the radio or the code will not take. I went through this with my acura. I had to partially disassemble the console. It may simply be a trick to force you back to the dealer and if you cant get at the antenna lead you may have no choice. good luck

2016-03-18 21:50:24 · answer #4 · answered by Anonymous · 0 0

Acura Radio Code

2016-06-25 15:07:22 · answer #5 · answered by Anonymous · 0 0

fedest.com, questions and answers