Power supply unit for daisy chain?

Question

Hi there, anyone know of a power adapter (UK) that will power ALL FIVE outputs of this daisy chain?
http://www.maplin.co.uk/module.aspx?ModuleNo=1410&doy=14m8

Thanks

*have asked Maplins and as usual no response :(

Answer 1

This is simply an easy way to connect multiple DC powered devices to one power source. They are all in parallel.

Assuming u can plug 5 devices in with the supplied connectors, what u need to do is to make sure ALL devices run on the same voltage - 12, 6, 9, whatever.

Then u need to add up all the DC amps for each device.

THEN u can ask the question again with that data, or go searching yourself.

The supply must supply the required VOLTAGE and the max AMP that all devices added together will ask for, and run from the AC input voltage (110 220) u have available.

NOTE: sometimes devices take AC and not DC voltage. Don't mix them up. This cable will connect either AC or DC, BUT if u do it at the same time make sure u are celebrating something, cause sparks will fly.

Answer 2

The 08' L7 is 1000 rms, so 2 L7's could be 2000 rms. you'll be able to desire to tournament a amp to the rms of the subs as close as possiable, i like the Kicker amps so 2 ZX1000.a million mono amps or the ZX2500.a million mono could be my suggesting. i like ported packing containers for the enhance however the alternative is yours. And the decrease the imdepence the extra capacity, so i could pick 2ohm if it is sweet. And sure they're super subs.

Answer 3

ask maplin's