English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

It was working fine a few weeks ago but 2 days ago when I went to use it, you could not view what you wanted to take a picture of. The battery is fairly new so it's not that. You can sort of half see images but it is too white and has some horizontal lines, seems to be the screen. Any ideas?

2007-08-13 13:51:41 · 4 answers · asked by vrossi46au 2 in Consumer Electronics Cameras

I should have mentioned it's less than one year old and it still takes pictures which can be downloaded onto my computer, you just can't see them on the camera screen.

2007-08-19 12:24:26 · update #1

4 answers

Sounds as though you need to have it serviced. If its a couple of years old it might be time to invest in a new camera.

2007-08-19 05:43:48 · answer #1 · answered by EDWIN 7 · 0 0

i've got have been given had the two manufacturers. The Fuji could have a faster shutter velocity and each so in lots of cases, takes better useful photos subsequently of certainty of it. besides the easy certainty that, there are some superb Kodaks obtainable in the present day that are taking good photos with good helpful properties. For me, it grew to alter into the Fuji, yet I grew out of it after a short quantity of time.

2016-11-12 06:20:36 · answer #2 · answered by Anonymous · 0 0

It sounds like the internal computer is SHOT! take the camera in to a local camera shop and get an estiment! the estiment is FREE! or if you have a current warranty and it's no older then 30 days old then the repair should be free unless you drooped it. if you did drooped it or got it wet the warranty is VOIDED!!

Sorry for the bad new's!

Thank You,

Bob

2007-08-19 06:33:18 · answer #3 · answered by Bob 3 · 0 0

Check your white balance

2007-08-20 21:14:29 · answer #4 · answered by Skysoldier 4 · 0 0

fedest.com, questions and answers