1994 ford f150 xlt heater core replacement?

Question

how do i replace the heater core. and is there a site with a diagram.

Answer 1

After you remove the heater hoses there should be a door inside the cabin to remove heater take your flash light and take a look its not that bad, be careful going back in do not damage it, hope this helps.

Answer 2

F150 Heater Core

Answer 3

I couldn't send the pictures but the procedure is self explanitory, you won't need the special tool listed, I have done many of these and have never seen the tool. Drain cooling system.
Disconnect heater hoses from heater core tubes in engine compartment and plug hoses.
Remove glove compartment for easier access.
Move the Rear Antilock Module out of the way.
Disconnect vacuum source, then leave the vacuum harness attached to the heater core cover.
Remove the heater control cable from the cover using tool D91T-18532-A.
Fig. 8 Heater Core Replacement








Remove the screws attaching heater core access cover to plenum chamber assembly in passenger compartment, then remove access cover.
Remove heater core and seal out of plenum chamber assembly.
Reverse procedure to install.

Answer 4

The ninety 8 variety heater center is vertically fixed, subsequently the sprint could desire to be bumped off and the precise of the evaporator case bumped off for get entry to. The e book shows extra or less 7 hours of exertions. A Ford tech that does this regularly can beat this time exceptionally actual, yet once you have basically finished it some cases or in no way, that's going to take that quantity of time. the only that pronounced quarter-hour, sturdy success. like to work out you do it!! Now the older trucks have been particularly ordinary, and quarter-hour on those grow to be approximately top. no longer gonna happen with the recent physique variety, however.

Answer 5

These are easy, drain the coolant, remove the hoses, remove the glovebox door, remove the heater core cover and pull it out.
Reverse for install.