220v 50hz will be fine, no problem at all. The UK runs on a 50hz cycle, not 60 hz (though this may not make a huge difference) but there is tolereance of plus or minus 10% on electrical supplies so therefore 220v will be more than sufficient
2007-08-05 22:55:01
·
answer #1
·
answered by superliftboy 4
·
1⤊
0⤋
If you're in the UK, you need 240v 50Hz. The one you've ordered will work, but if you use it on full power all the time, the motor might give up after a few months.
Having said that, I've got a 1950s 200v hair drier that's still going strong (apart from having a new flex around 1980).
2007-08-06 06:00:06
·
answer #2
·
answered by Anonymous
·
1⤊
0⤋
The current uk voltage and frequency cycle is 230v 50hz.
The appliance you ordered will be fine. The 50hz basically means that the alternating voltage that comes out of your plug socket alternates between 0 volt plus 230 volt and minus 230 volts and 50 times per second.
the frequecy is fine, and the extra 10 volt will be fine as every appliance although rated at a voltage as a certain percentage scope either way controlled by modern switch mode power supplies.
Any more info feel free to ask..
2007-08-06 09:14:01
·
answer #3
·
answered by biker550_uk 3
·
1⤊
0⤋
You are of course aware that ordering electronic items from China is very risky?
Most of the time, they don't actually arrive, and those that do are very poorly made and pose a serious fire risk.
2007-08-06 17:10:19
·
answer #4
·
answered by Nightworks 7
·
1⤊
0⤋
if you are in the us you need to make sure that it is 220/50. if you dont know what you are doing an electrician could run you a new line from your breaker box and maybe a new breaker.
2007-08-06 09:47:58
·
answer #5
·
answered by disciple 4
·
1⤊
0⤋
Why from china?? Think about your carbon footprint
2007-08-06 06:00:05
·
answer #6
·
answered by ewanspewan 4
·
1⤊
0⤋
Are you UK.? You need 240v 60 cycle.
2007-08-06 05:55:06
·
answer #7
·
answered by Anonymous
·
0⤊
2⤋