helo, i just bought a set of motorola t9500 2 way radios, and i was wondering if i need to burn in the speakers, because they sound really crackly when i turn up the volume, i was wondering how i can go about this, and if the crackly sound is temporary due to new speakers, or are they all like this? permanently
2007-07-27 06:26:45 · 2 answers · asked by * r 2 in Consumer Electronics ➔ Other - Electronics
it doesnt crackle when i adjust the volume, it crackles when the volume is up high, i have to have the radio set to 1\3 volume for the sound to be clear, but when i turn it up and someone talks, they are all garbled and crackly
2007-07-27 06:41:22 · update #1
i was thinking about removing the speakers, and hooking them up to my stereo, and running pink noise through them. thus loosening the suspension and spider of the speaker itself, the speaker itself is very quiet, more quiet then the 6500's we use @ work. So i connected the dots, and me being an audiophile, have learned to break in new speakers for @ least 30 hours @ low freq at a low volume @ first, then raising the volume over time, its like a new car, if u floor it brand ew, ur gunna break something, same applies with speaker performance.
2007-07-27 06:46:13 · update #2
if its the amplifier, then im warning all u guys not to buy this product, because this is with both radios, the set as i had mentioned earlier, but i am still burning in the speaks as we speak, ill post again on the third day to display my results
2007-07-27 14:28:10 · update #3
It could be the speakers, but I am betting the amplifier isn't too good. If it has an earphone jack, you can try connecting that to an external speaker or amplified speaker. Set the volume at 1/3 and adjust the amp spks to a low level then crank up the 9500.
2007-07-27 08:38:04 · answer #1 · answered by Bill R 7 · 0⤊ 0⤋
listen care fully here, that crackeling, is not the speakers. what it is, is dirty controls, If tou can get those controls, and see ware the three contacts stick out of the side,get a spray can of CONTACT CLEANER, spray some in ware the three stick out, and work the control back and fourth, untill you start to feel some resistance returning. give it another application, and you ought to be good to go.
2007-07-27 13:34:47 · answer #2 · answered by duster 6 · 0⤊ 0⤋