English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

i need to put in a new radio because im putting in subs and an amp. also on the stock radio the volume knob just dosent work anymore. ?
i want to remove the dash and i cant see how to unless taking off the whole front dash >?

2007-07-22 04:02:59 · 5 answers · asked by spike1master 2 in Cars & Transportation Car Audio

5 answers

Seriously, One Gun Kid, do you think you're the first person who ever thought of that answer? Or are you the one who posts it on every "how to remove my stereo" question that's ever been asked since the beginning of time?

A Plymouth Breeze is one of the easiest radio removals you'll ever see. Just pull off the plastic dash bezel that surrounds the radio and climate controls, then remove the two 3/8" screws that hold the radio in place. It literally takes under a minute.

Keep in mind that the factory radio doesn't have a ground wire; it's grounded through contact between the radio chassis and dash metal. When you install your new deck, you'll need to connect the ground wire to the dash structure.

2007-07-22 06:15:22 · answer #1 · answered by KaeZoo 7 · 0 0

1997 Plymouth Breeze

2016-10-02 00:40:31 · answer #2 · answered by weafer 4 · 0 0

If you are having problems removing the dash, you should have the radio installed by a professional.

2007-07-22 04:12:50 · answer #3 · answered by Mr. G 6 · 0 0

Leave your car parked down the street from my house. Leave your window open. Come back in half an hour and the radio will be gone.

Now you just need to find your car, it's not where you left it.

2007-07-22 04:11:36 · answer #4 · answered by Anonymous · 0 0

I've used Crutchfield when installing my stereo in my car. They have key sheets that tell you step by step instructions how to take out and put in your stereo for all cars. Hope this helps.

2007-07-22 04:14:08 · answer #5 · answered by Wyatt S 1 · 0 0

fedest.com, questions and answers