English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I have had this problem for quite a while..ever since I added my K&N air filter. My truck is a 06 Ram 3500 with an automatic transmission. I have recently added an AFE State 2 intake and an ATS Arc Flow intake manifold, and have noticed the problem when the turbo starts to push 25 PSI. The boost gauge will drop dramatically about three times from 28 to 25 and then down to about 18 PSI, what can I do to help correct this problem???

Anything would be of help...

Thank you...

2007-07-19 06:39:49 · 2 answers · asked by sniper76halo 2 in Cars & Transportation Car Makes Dodge

2 answers

I have a 04.5 3500 swb with ram/air induction quadzilla 100hpchip.2" lift front 313x70x17 bf at/ko with a 60 lb boost guage it delivers 45lb boost.The problem is you have increased the intake an the computer is defueling the Eng so get a chip to fuel your Engine an change the timing.Since you have put your warranty in question than you can use a downloader an change the parameters in the computer.

2007-07-19 08:46:53 · answer #1 · answered by 45 auto 7 · 0 0

Do what i did, get a edge comp, bigger injectors, bigger fuel lines, VP44 hot rod injector pump, twin turbos, lift pump, stronger head studs, AFE cold air intake,ceramic coated pistons, cam shaft,3 piece exhaust manifold from dave's diesel, stage 3 valve work to heads, Fass fuel system and some methanol injection and you'll be good to go. TRUST ME!!!!!!! OH and put some 7'' Bull hauler stacks :>)

2007-07-22 12:33:32 · answer #2 · answered by Texas Diesel Power 2 · 0 0

fedest.com, questions and answers