2007-07-18 04:31:12 · 7 answers · asked by jambow95 1 in Cars & Transportation ➔ Car Audio
You can connect it to any 12-volt battery: car battery, lawnmower battery, 12v cordless drill battery. Connect the black wire to the negative terminal. Twist the yellow and red wires together and connect them to the positive terminal. This should power up the deck long enough for you to eject the CD.
2007-07-18 04:56:50 · answer #1 · answered by KaeZoo 7 · 0⤊ 0⤋
YOU CAN GET THE CD OUT BY USEING a 12 dc volt adapter..all you have to do is connect the negative wire to the metal caseing on the stereo and take the positive wire and connect it to the postive also called the hot wire it is useally a red wire with a fuse attached to it....p/s you can also use a 12 volt battery....
2007-07-18 11:47:41 · answer #2 · answered by sparkey 1 · 0⤊ 0⤋
Buy a new car, remove the new stereo and install the old one. Eject the CD, swap stereos and trade the car back in.
Or you could get off the $12 and buy a new CD!!!
2007-07-18 11:46:52 · answer #3 · answered by BillyTheKid 5 · 0⤊ 0⤋
Get the red and black wires coming out of the back of the stereo. You can connect them to a riding lawnmower, motorcycle, or car battery to power it up.
2007-07-18 11:36:49 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Isn't there a little, tiny hole on the front of the stereo where you can stick a thin wire and release the CD?
2007-07-18 11:39:52 · answer #5 · answered by Anonymous · 0⤊ 0⤋
Connect a 12V DC source to the power source of your Stereo and hit the eject button.
2007-07-18 11:37:18 · answer #6 · answered by hsueh010 7 · 0⤊ 0⤋
Hook it up to a 12 volt battery and push "eject".
2007-07-18 11:36:07 · answer #7 · answered by katshot 2 · 1⤊ 0⤋