i just bought a 89 mustang and i was replacing the spark plug wires. yet i forgot where they go in the distubutor cap. does anyone know how they go?
2007-07-17 23:03:17 · 4 answers · asked by mike d 1 in Cars & Transportation ➔ Car Makes ➔ Ford
You should find the firing order stamped on the engine somewhere, and you should find the distributor pins in sequential order with # 1 marked somewhere on the inside or outside of the distributor cap.
If you don't know these sites already, You may want to familarize yourself with them:.
http://www.allfordmustangs.com
http://www.mustangforums.com
(the forums on both sites, offer questions and discussions that you may find helpful)
2007-07-17 23:23:25 · answer #1 · answered by me 7 · 0⤊ 0⤋
Well, its going to be hard for anyone to help you without knowing if you have the 5.0 V-8, the V-6 or the 2.3 litre 4 banger under the hood.
2007-07-17 23:42:58 · answer #2 · answered by Anonymous · 1⤊ 0⤋
Not off hand, but a Chilton or Haynes manual will tell you. You might even go to a Ford dealer and they can give you the firing order too.
2007-07-17 23:07:05 · answer #3 · answered by Jody D 6 · 0⤊ 0⤋
Before you removed the wires you should have marked the wires going to each cylinder
2007-07-18 05:36:01 · answer #4 · answered by daniel_m_libich 4 · 0⤊ 0⤋