If you are reloading and you dont have info for this round you Definitely need to get a load manual, you do not want to load other peoples recipes unless they are with in safe levels of your load data. Bad things will happen!!!
2007-07-17 20:01:23
·
answer #1
·
answered by Jon 4
·
1⤊
0⤋
Factory ammunition differs a bit Remington, Winchester use between 2.1 and 2.5 grains of powder respectively. There are many reloading charts available that you can read and determine which load you wish to use yourself if you are doing reloads. The .32 ACP cartridge wasn't desined to be a +P type round so you will find the above averages pretty close to factory specifications. I would hesitate to use the term "Normal" load and replace it with "Standard" load....Good Luck!
2007-07-17 08:22:10
·
answer #2
·
answered by JD 7
·
0⤊
0⤋
With a 71 grain bullet, loads range from 2.2 gr. Bullseye to 2.5 gr. Unique.
2007-07-17 11:29:24
·
answer #3
·
answered by eferrell01 7
·
0⤊
0⤋
It varies depending on the powder you are using, go to you local gun store and pick a reloading manual. Some of the powder manufactures even provide manuals you can pick up for free. It will change depending on powder and bullet weight and style.
2007-07-20 18:35:59
·
answer #4
·
answered by salamander492 4
·
0⤊
0⤋
It's usually figured at 7,000 grains (by weight) per pound.
Look at the Alliant Powder website given above. It's reliable information.
2007-07-17 11:22:47
·
answer #5
·
answered by Squiggy 7
·
0⤊
2⤋
Follow this link....
http://www.alliantpowder.com/reloaders/RecipeDetail.aspx?title=Pistols%20and%20Revolvers>ypeid=1&weight=71&shellid=1011&bulletid=11
2007-07-17 07:58:15
·
answer #6
·
answered by Sparky 3
·
0⤊
0⤋
70 grains.
2007-07-17 16:09:43
·
answer #7
·
answered by super682003 4
·
0⤊
2⤋
About 5,553 actual grains per round. Be sure to count each grain individually or you could do damage to the weapon.
2007-07-17 08:10:39
·
answer #8
·
answered by coolhandven 4
·
0⤊
7⤋