2007-07-15 11:45:46 · 6 answers · asked by Anonymous in Cars & Transportation ➔ Car Audio
i already attached the remote wire to the amp
2007-07-15 11:51:46 · update #1
your amp is not shutting off after you turn the car off. find a fuse for your remote wire that will shut off when the key is removed. i usually use the radio fuse.
2007-07-15 11:48:29 · answer #1 · answered by warrantyvoider 3 · 1⤊ 0⤋
As suggested, make sure the amp shuts off when you turn off the engine. The math says that the amp will draw over 100 amps per minute so you can see how long a 720 amp rated battery is going to last.
2007-07-15 11:55:04 · answer #2 · answered by St N 7 · 0⤊ 0⤋
Need a bigger alternator --at least 120 amps or better and possibly go with a capacitor to hold reserve power for the amp. And, as stated before, make sure the system turns off with ignition.
http://www.the12volt.com/
2007-07-15 12:30:47 · answer #3 · answered by paul h 7 · 0⤊ 0⤋
you may desire to make a mark on the quantity knob the place the wear happens and shop the quantity below that. What in the international does everyone want with a kilowatt slamming on them? are you able to even see with that form of tangible abuse? in case you assert you are able to no longer hear it whilst this is decrease, then duh- your ears are broken heavily and maximum possibly completely. permit me backpedal a sprint: If the amp is two ohm stable and additionally you're making use of a pair of two ohm audio device linked parallel, the impedance finished is below 2 ohms and that's a subject. shop the impedance at or greater than the steadiness shrink or the amp will draw extra modern and there will be blood- I recommend broken factors.
2016-10-03 21:25:27 · answer #4 · answered by antonanzas 4 · 0⤊ 0⤋
is the wiring you need use an installation kit for your amp at least 4 gua
2007-07-18 06:58:01 · answer #5 · answered by viper 4 · 0⤊ 0⤋
most likely you'll need to upgrade your alternator to higher amps.
2007-07-15 11:49:15 · answer #6 · answered by ieca909guy 3 · 0⤊ 2⤋