ran diagnostic at autozone and had random misfire code. used autotech softwared and suggested egr or posible pvc maybe to blame but unsure if that is correct
2007-07-15 06:32:11 · 3 answers · asked by armient 2 in Cars & Transportation ➔ Car Makes ➔ Dodge
guess i should have added the engine part lol its a 4.7 magnum engine i did dry it out before i installed the new plugs may also be a coil problem since each plug has its individual coil ontop of it any thought are apreciated
2007-07-15 17:52:40 · update #1
Change the distributor cap and rotor, and plug wires, sounds like moisture is seeping in somewhere.
2007-07-15 06:39:33 · answer #1 · answered by Pengy 7 · 1⤊ 1⤋
Knowing what engine you are talking about would help immensely. Going with what is usually found in '02 Dodges, I'd say you have a spark plug wire problem. Quite often, when excessive water collects around a spark plug, it causes ARCING which usually damages the spark plug wire boots (the part that goes over top of the spark plug). This is just a quess....
2007-07-15 07:14:10 · answer #2 · answered by k.t. W 3 · 0⤊ 0⤋
the water will cause one to miss-fire ,it creates a path for voltage to jump to ground before it reaches the plugs,id try drying it out and see if that helps it,knowing what engine you have would have helped a lot also,good luck with it.
2007-07-15 07:58:34 · answer #3 · answered by dodge man 7 · 1⤊ 2⤋