Ok, here we go. I was working on my comp and i removed the RAM sticks and put them back in. after that the comp would not not boot up, it powered on but did not beep or boot up. along with that there is no signal being sent to the monitor. i have checked the plugs and have re-seated the graphic card and don't know what els to do. along with this the RAM sticks get REALLY hot while it is powered up (don't know if that is normal but worth mentioning)
2007-07-14 15:21:30 · 2 answers · asked by Chris 1 in Computers & Internet ➔ Hardware ➔ Monitors
Remember RAM is very ESD sensitive. Make sure you are grounded to the chassis of the computer before you touch the sticks. Make sure that they are stored in an ESD bag or box while out of the computer and that that is grounded to the computer before they are removed.
Try pulling your RAM again and reinserting. Making sure that they are fully inserted.
If that dose not work, try then one at a time, if you can.
It is possible that you have zapped one or both of the RAM sticks.
2007-07-14 16:03:40 · answer #1 · answered by Simon T 6 · 0⤊ 0⤋
try putting your ram in diffent slots largest first
2007-07-14 22:26:03 · answer #2 · answered by Lorelei 3 · 0⤊ 0⤋