each time i go on my pc it say sytem failed to cpu over clocking and then when i look at my mnoniter nothing shows.my moniter works with other computers but doesnt want to work with mine what should i do
2007-07-14 05:49:55 · 5 answers · asked by gregory s 1 in Computers & Internet ➔ Hardware ➔ Monitors
Your system is failing because you have the CPU overclocked. Boot your machine and enter the BIOS. Reset you CPU clock to it's default setting. I think that will clear your problem.
2007-07-14 05:54:47 · answer #1 · answered by Ron M 7 · 1⤊ 0⤋
I am not sure if this is the problem, but try to change the refresh rate for the monitor.
Right click on desktop -> properties -> Settings Tab -> Advanced and change the rate.
Usually, monitors should have a rate on the back that they recommend. Check that out and see if that fixes the problem.
2007-07-14 05:58:21 · answer #2 · answered by v3ks 3 · 0⤊ 0⤋
As "Ron M" suggested, enter the BIOS setup and stop the overclocking until you resolve the problem. Video cards, as well as other components in the machine have a nasty habit of misbehaving when they're being pushed to their limits.
2007-07-14 06:00:37 · answer #3 · answered by Anonymous · 0⤊ 0⤋
the monitor could be incompatable or you over clocked your computer. not all monitor's work on all computer's same goes for any hardware that you may want to install.
i doubt it's the monitor having issue's, it's your computer, try changing the setting's back to the way they were and go from there diagnosing problem's.
2007-07-14 05:56:16 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Shame, she is probably hiding something.
2007-07-14 05:52:58 · answer #5 · answered by niddlie diddle 6 · 0⤊ 1⤋