I HAD 2 installations of windows xp but i DELETED 1 but it still asks me which 1 to boot into?

Question

but there is now currently only one istall of xp on my computer. ist getting annoying becuase now each time before it will load windows it asked me which 1 to boot and i have to move the it to the second on if i leave it on the first one it tries to boot what used to be their and then fails.

Answer 1

You need to edit your boot.ini file to remove the now obsolete entry.

Start>>run>>msconfig

Click the boot.ini tab

remove the incorrect entry.

To differentiate between the two, look at the partition they point to, it will look somehting like this (0,0) for the first drive, first partition, or (0,1) for the first drive, second partition.

Answer 2

You can change the boot sequence to your current install by following these instructions..

Right click on my computer and select "properties"

Select the "advanced" tab

Click the box marked "start up and recovery"

In the system startup section under default operating system
you will find a selection list. { the one that shows first is the bad install }

Click the downfacing arrow and select the next operating System in the list.. That is your current good install.

After that - where the checkbox is that says Display Operating system for: Put 1 second in the box.

Hit OK And you're good to go...

The only other way to do this is to edit the BOOT.INI file on your C:\ drive

hope this helps

Answer 3

i don't recognize why you as much as date making use of a disc! SP3 would have been downloaded and put in via the automated updates! not in elementary terms that SP3 ought to have been put in approximately 3 years in the past. additionally yet another concern I fail to verify why human beings continuously have this urge to pass into the BIOS to alter the boot sequence each and every time they choose to place in something. that is totally pointless as a results of fact it would have got here across the disc besides! The boot sequence ought to continuously be CD/DVD drives first and then the not person-friendly force. You taking the disc out for the period of installation evidently which you have corrupted the replace. the only concern you're able to do is attempt and do away with the partition. Failing that your in elementary terms option now's to back each and every thing off you may and reinstall XP. Sorry to assert this sounds like yet another "a splash wisdom is a dangeous concern" state of affairs. in the experience that your not constructive in doing something then continuously get somebody around who's conscious of what they are doing!

Answer 4

I had the same problem when upgrading a WIN 98 computer to WIN 2000. I think you go into my computer somewhere and select from a dropdown menu what operating system to use and deselect "display a list of operating systems for 30 seconds." I'm not sure if you do this the same way on XP though.This is a simple problem, don't reformat anything!

Answer 5

The first answer is basically right but I don't know if you can delete entries from msconfig. You might have to edit the actual boot.ini file, which is located in your root (C:\) directory. If you do edit the file manually, make sure you make a copy of it first (Call it boot.old or oldboot.ini or something), in case something goes wrong.

If you don't want to edit the file, within msconfig you can set your preferred OS to be the "default" and then set the Timeout to 0, and then just leave the unnecessary line there, and it should boot up without any delay.

Hope that helps.

Answer 6

When you reinstalled your second one you did a what is called a dirty load, you just put your windows disk in and let it reformat and reload didn't you, that's what causes that.

You need to totally reformat your computer properly before reloading, I just did that on this. The way to fix it is in one of the above answers so I'm not going to repeat it but wanted to let you know how to prevent it in the future.

Answer 7

format and do a fresh install,
PLEASE remember to backup everything to disc or external drive first. like a word document with all your favourite web addresses that you might not remember

and unplug the external drive first if you have one, you don't want to make that mistake

or if you really know what you are doing, you could try chasing the ghost of the program in add/remove option.
But a fresh install would be easier, less chance of errors and a fatal system crash

Answer 8

I've had the same problem, and found that a format of the drive is the best way to go. A clean install always works best.