thats whats rong with my amp i just got it and its doing that i thought mabey thats the problem
2007-07-10 20:25:56 · 8 answers · asked by tom h 1 in Cars & Transportation ➔ Car Audio
oh it will work for about 10 seconds till you blow that fuse and then you'll need a new one so use the rite fuse its cheaper
2007-07-10 21:11:42 · answer #1 · answered by arwilcox187 2 · 0⤊ 0⤋
Use the right size fuse. If it is too small, the fuse will blow very quickly. If it is too big and there is an electrical problem like a short, wires may melt, the amp may be damaged or you could even have an electrical fire.
2007-07-11 03:31:35 · answer #2 · answered by Rainman 5 · 2⤊ 0⤋
If the fuse isn't blown and isn't defective, it isn't preventing the amplifier from powering up. You could use a 10-amp fuse, and the amplifier should work perfectly well until the fuse blows.
Your problem isn't the fuse.
2007-07-11 08:34:38 · answer #3 · answered by KaeZoo 7 · 1⤊ 0⤋
the fuse is a weak point in the circuit, the right fuse should always be used. Im sure a 60 would work but would blow under heavyer use.
2007-07-11 03:35:59 · answer #4 · answered by Dude 1 · 1⤊ 0⤋
If the circuit calls for an 80A fuse, then you can't expect a 30A to work. It won't. You may need to take it in to a stereo installation shop and have them wire it up. You need different gauge wire for 80A instead of 30A.
Take it to a professional, and let them do it, so you know you have a good installation. good luck.
2007-07-11 03:39:12 · answer #5 · answered by Fordman 7 · 1⤊ 0⤋
It's like trying to push the water of a giant river down a very small creek, you're gonna blow the fuse maybe even short cercuit....
2007-07-11 03:34:15 · answer #6 · answered by synxz001 3 · 1⤊ 2⤋
I agree with KaeZoo.
2007-07-11 13:03:33 · answer #7 · answered by Anonymous · 0⤊ 1⤋
dude spelling you sound like a idiot.
2007-07-11 22:04:56 · answer #8 · answered by moe h 4 · 0⤊ 0⤋