ok, so apparently there is sound, and i can hear everything clearly, but no image at all. it's as if the tv screen was broken, but the sound is still there. what happened? and how can i fix it?
2007-07-09 08:56:56 · 4 answers · asked by fetterfetty 2 in Consumer Electronics ➔ TVs
you may have a cable / HDMI conflict.
If you have both HDMI and component cables connected to a cable box selecting one input will give pix and no sound, the other will give sound and no pix.
disconnect one from both ends and select the proper setup on the cable box and tv. The cable box must have HDMI selected if that is what you are using and the option doesn't appear unless the HDMI cable is plugged into the box.
I think it is a copy protection FEATURE. YAH!
2007-07-09 09:29:08 · answer #1 · answered by Bill R 7 · 0⤊ 0⤋
For the classic video connection check to make sure the Yellow RCA plug is connected between the source of the video and the Plasma TV. For the HDMI connection check the HDMI cable between these devices. For Component video connection check the "paired" Red, Blue and Green cables between these devices. Seems like your audio cables are connected (usually the red and black or white and black pair).
If however this TV simply connected to Antenna, Cable or Satellite Box then you might have real problems with the TV.
Good luck. It helps if you look at the manual and check your connections to the drawings.
2007-07-09 09:24:56 · answer #2 · answered by Broadcast Engineer 6 · 0⤊ 0⤋
makesure all your wires are plugged into the inputs all the way. make sure you have the correct wires going to the correct places.
2007-07-09 09:03:50 · answer #3 · answered by twazl634 3 · 0⤊ 0⤋
if you're t.v. still under warranty just take it back
2007-07-09 09:08:19 · answer #4 · answered by legion1908 1 · 0⤊ 0⤋