English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

4 answers

wash the fruits carefully with warm water and half crush them in a sterilized bottle and add yeast 2% of weight and cork it firmly with a cork having one hole and a bent tube in it. Immerse this tube in a vessal containing water to absorb the liberated co2.Place the bottle in a warm place and allow to ferment for 3 to 4 days. Take care that the bottle contains only 3/4th of its capacity to allow good fermentation.
after 4 th day remove the cork and filter the contents if reqd dilute with boiled water and cooled to room temp.
you will get tasty home made wine

2007-07-09 16:38:12 · answer #1 · answered by Anonymous · 1 0

How to Make Wine - The Basic Steps Involved

Below I'll share with you the process and tools involved in making wine at home. You can find more information and resources here - make homemade wine.
The Process Behind Homemade Wine

On a previous page we discussed how to make a variety of homemade wines. The top two choices of how to make wine without a commercial kit were to use pulp or juice as your starting ingredient.

Both of these processes are explained below. You'll see how truly easy it is to make wine once you've finished this page!
Pulp Fermentation

* This traditional process gives the best wine color and flavor.
* A pulp is made of the fruit and fermentation begins in a bucket.
* The bucket is called a 'primary fermentor' and the fruit pulp is called 'must'.
* Water, sugar and other ingredients are added to the pulp and the fermentor is sealed against air by an airlock (if you're on a tight budget you can secure plastic wrap around the top with a rubber band).
* Within a few days the resulting juice is removed from the primary (bucket) and placed into a 'secondary fermentor' - homemade wine enthusiasts call this a carboy.

Juice Fermentation

* This beginning fermentation process actually works best for white wine varieties (where final wine color and a deep flavor is not a concern).
* To make wine by juice fermentation you'll be using the juices that are extracted from the fruit (by mashing, then straining), or by using a juice concentrate, or by purchasing a wine kit - see the kits at right).
* The juice, concentrate, or kit contents, are then placed directly into the carboy, bypassing the entire pulp fermentation stage as above.

What Are The Next Steps In How to Make Wine?

1. Sterilize All Equipment
2. Prepare the Must*

Pulp Fermentation - Add all ingredients except yeast and nutrient to your primary fermentor (bucket).

Dissolve the sugar in pure filtered and boiled water.

Let it stand covered, but not locked, for 24 hours.

Juice Fermentation - Add all ingredients to the carboy (remember you are bypassing the entire first container process here) and plug the bottle with a paper towel to allow oxygen into the bottle. This promotes yeast growth during the first few days, after this period you will not want air to touch your wine.

3. Take A Hydrometer Reading

If you've got a hydrometer, take a reading of the starting SG (Specific Gravity).

4. Add the Yeast

Fermentation will start within 2 days - you will notice foam formation and bubbles rising towards the surface.

Pulp fermentation may take up to a week. The fruit will float on top and needs to be pressed down and gently stirred a few times a day.

While The Wine is Being Made...

1. Take Another Hydrometer Reading

Keep an eye on the SG (Specific Gravity) during the initial fermentation period, generally when it reaches 1.020 it's time to...

2. Strain and Rack Your Homemade Wine

The sediment (on bottom) and cap (on top) now need to be separated from the wine by 'racking' (siphoning and straining).

Avoid vigorous splashing, this exposes your wine to the air, which may cause oxidization. Fill your bottles almost to the top, if no foam is being formed.

3. Time for the Airlock

The Biggest Factor in How To Make Wine - The Wait

After a month or so, fill the carboy all the way to the top to minimize the surface area. When the wine has stopped fermenting (it has stopped bubbling) it will need racking again (siphon and strain). This may need to be done several times to ensure a perfectly clear batch of wine.

Take Another Hydrometer Reading of Your Wine

When the Air Lock stops bubbling and the SG (Specific Gravity) reaches .0990 it's time to...

Add Fining Agents to the Batch

Add bentonite, especially if the wine is hazy. Of course if your recipe calls for something different, then please follow that wine recipe adding whatever is required at this fining stage.

Bottling, Corking, Labeling

1.

24 hours before bottling add one crushed campden tablet to the wine (available at most wine supply stores.
2.

Then, 12 to 24 hours before bottling your home made wine, soak your corks in a sulphite solution.
3.

When ready, fill bottles to about 1 cm below where the cork will reach.
4.

Labels are best glued on with a water soluble glue (any paper glue or glue stick works fine).

Wait and Wait Some More

Aging improves the quality of your homemade wine. Although you're probably anxious to show your friends that you learned how to make wine at home, let your bottles sit a few months to a year before indulging.

But most of all, my favorite pun when talking about wine...

"Enjoy the Labor of Your Fruits!"

2007-07-11 08:38:11 · answer #2 · answered by shane c 3 · 0 0

If you want to virtually guarantee success and a very good product, I would suggest getting a started wine kit. You can spend upward of $250.00 to get that first batch of wine but it will make about 25 bottles and if you follow directions, they will keep for a couple of years. You can spend less on a starter kit also.

These companies generally sell alot of types of fruit juices or at least give you a good recipes. Most all companies will have a booklet on how to make wine. Naturally they want you to buy their products so they will give you very good instructions so you'll come back for more products.

Try typing these two into you search bar and read the sites careful.


Bier Haus International or E.C. Kraus.com

At least get a booklet from either on how to make wine at home. It is not difficult and once people sample your wine, you'll be getting requests for more freebies.

2007-07-09 18:45:43 · answer #3 · answered by Ret. Sgt. 7 · 0 0

take black grapes wash and put in a mixie add some water and sugar to it and crush in a mixie and stain the juice remove the pulp and keep this juice for 2 hours then drink it gives a very special taste
if require add some ice
some preservatives.
same with the pomogranate also.

2007-07-08 20:35:06 · answer #4 · answered by padmaraj18 2 · 0 0

fedest.com, questions and answers