I am not very good with cameras and so just recently i uploaded some photos onto my computer using my memory card and the next day i put my memory card back into my camera and ever since then whenever i turn on my camera the screen turns on but it says "Card not Initialized" and it won't allow me to take pictures or record.
I'm using a fugifilm S3000 i believe
and my memory card is also fugifilm (xD 128 MB)
can someone pleaseee help me????
2007-07-03 06:02:26 · 4 answers · asked by greengirlsrock2005 1 in Consumer Electronics ➔ Cameras
What did you do when you uploaded your pictures? Did you erase the pictures that was on the card? If so, it is possible the way you did it caused the card not to be recognized by the camera. You will need to initialize the card in order for it to be useable again.
2007-07-03 06:49:48 · answer #1 · answered by gkk_72 7 · 0⤊ 0⤋
I checked with the HP website and your camera uses a standard SD memory cars. Its almost everywhere. Cellphone stores, electronic stores, computer store, camera stores. Just bring in where ever and ask for a SD card. Bring your camera if you want to make sure.
2016-05-17 08:26:22 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Verify that your pictures were actually transferred to your computer. Then you are safe to format the card in the camera. Just use the setup option on the camera and select to format the card.
2007-07-06 15:35:44 · answer #3 · answered by fritz_monroe 3 · 0⤊ 0⤋
Take a look at this amazing offer! I have my FREE camera right now. It is a Nikon CoolPix Camera. Crystal clear quality and it takes videos and plays music too. Click on this link now before this offer runs out. Go to the link below to get your hands on one of your choice of three amazing cameras. Hurry before they run out!
http://urlx.org/directtrack.com/daae7
2007-07-07 02:49:31 · answer #4 · answered by Anonymous · 0⤊ 1⤋