Does this mean the valve will blow apart if you use more pressure? Or does it mean it simply won't open/close properly? Thank you.
2007-06-28 07:31:08 · 4 answers · asked by Dan 1 in Science & Mathematics ➔ Engineering
As stated before, this will mean leaks may occur. If they don't, then you're lucky. You should have a relief valve to ensure that your system doesn't see pressures at the minimum m.o.p. of all the equipment.
2007-06-28 07:55:44 · answer #1 · answered by harvityharvharvharv 3 · 0⤊ 0⤋
As indicated above. Additionally, valves will be rated for its "burst pressure", the pressure by which it will blow apart. This is especially important in applications where the pressure may be high enough to blow up valves.
2007-06-28 08:02:37 · answer #2 · answered by BRUZER 4 · 0⤊ 0⤋
The max operating pressure is the max pressure it can take before leaks occur. Of course if you exceed this by enough pressure you can have an explosion unless you have a pressure relief somewhere else in the system and it pops first and relieves pressure.
2007-06-28 07:37:18 · answer #3 · answered by GTB 7 · 0⤊ 0⤋
you will destroy the solenoid if you exceed that pressure. It won't blow apart, but it will leak.
2007-06-28 07:35:18 · answer #4 · answered by Lavrenti Beria 6 · 0⤊ 0⤋