Flash brackets and bounce flash devices?

Question

I have a flash bracket and would like to know if its ok to use a flash bounce device even if the flash is raised up higher on the flash bracket. I suppose it should act the same way regardless of the height but i am curious to know if bouncing flash while having the flash on a bracket is too much.

thanks

Answer 1

There is never too much distance between the flash and the lens.

Answer 2

that's a particular technique that Canon or Nikon or any of the main flash manufacturers could do to the flash. You specify you want to do bounce flash, and the manufacturing unit will furnish a specifically lined unit. i'm uncertain of the substrate used for the coating, in spite of the undeniable fact that that's difficult. it could take bouncing all day, against something you want, and nonetheless happly land multi functional piece and artwork completely. The coating expenditures everywhere from $one hundred to over $250, watching the flash sort. I definitely have thrown my Canon 580EX agains the wall 1000's of circumstances and it works positive. try yours! seem on your flash handbook. If it says the flash is designed for bounce flash, then you're waiting. Throw it around till ultimately your coronary heart's content textile! by way of the way, I see you're an novice wedding ceremony photographer. this gadget works great at weddings. I noticeably love bouncing the flash off the bride's annoying head. often times it even knocks a splash experience into them. steve

Answer 3

You can bounce or even use a diffuser if you like. Do some trials to see how you like it. But the bracket by itself solves most of the problems you'd use a diffuser for.

Answer 4

Flash Brackets for different lighting by using manual settings like +1 stop,+2stops,0 stop,-1stop,-2stops and bounce flash for one type of distance,using +1.35 stop only, if you manual setting at less than -1.35 stop, it will underexpose for your pictures that had taken.