2007-06-21 14:39:19 · 22 answers · asked by Anonymous in Entertainment & Music ➔ Polls & Surveys
You can't it is not a phaser!
2007-06-22 09:59:28 · answer #1 · answered by ? 2 · 0⤊ 0⤋
Easy!
Find a 220 volt outlet (in the USA anyway). Take out the cartridge and replace it with a pack of 9 volt batteries. Put metal shavings in the paper slot.
Wet down the floor and then leave the area!
2007-06-21 21:48:23 · answer #2 · answered by Mr. Badwrench 6 · 0⤊ 0⤋
It's quite simple, really. Just touch a bare wire or the prongs on the electrical plug while you're plugging or unplugging. That should produce an effective stun.
2007-06-22 01:41:12 · answer #3 · answered by WillyC 5 · 0⤊ 0⤋
It`s kind tricky.It has to be turned on,and lifted up,
there`s an access panel underneath.It has to remain level,
right side up.After you remove the panel and insert the dilithium crystals,just flip the on switch and you`re good to go.
2007-06-21 21:46:52 · answer #4 · answered by Rich B 7 · 0⤊ 0⤋
Pull the plug outta the wall and stick two fingers into the socket! Oh YEAH!
2007-06-21 21:44:07 · answer #5 · answered by Anonymous · 0⤊ 0⤋
Just start printing pics from the x-file...those will stun you for sure.
2007-06-22 17:31:41 · answer #6 · answered by Madam Naka 7 · 0⤊ 0⤋
It's a secret button hidden in the back...I'll email the location to ya.
2007-06-21 21:43:07 · answer #7 · answered by Fat Boy 5 · 0⤊ 0⤋
You connect the Alpha Red wire to the Zulu yellow wire. ... Then you reroute the parameters to set to : kill when used... use the dark lord's sabre to weld...
2007-06-21 22:01:53 · answer #8 · answered by iluvafrica 5 · 1⤊ 0⤋
Take out the ink cartridge, shake it, and put it back it. Should work good as new.
2007-06-21 21:43:08 · answer #9 · answered by JordTeic 3 · 0⤊ 0⤋
Set it to print a picture of yourself :)
2007-06-21 21:42:03 · answer #10 · answered by KD 5 · 1⤊ 0⤋
Suspend it over a doorway.
2007-06-21 21:42:06 · answer #11 · answered by Anonymous · 0⤊ 0⤋