ok this is confusing but......ok i have been downloading stuff with kodack easyshare the camera and the dock for a long time but today when i tryed to download a movie it wouldnt work!!! Nothing would happen!!! And yes everything was plugged in the cords and the chip were all in!! Then i went onto kodak easyshare and clicked on transfer/sync and it said that nothing was plugged in!!! What should i do??
2007-06-18 15:12:07 · 4 answers · asked by Anonymous in Consumer Electronics ➔ Cameras
Reboot your computer as a starting point. With XP, you should be told when the camera USB is removed and plugged in. If nothing happens, it is likely the power to the camera unit has been lost (my cat unplugged mine).
Some camera cards are treated as a disk drive and somethings you do on a computer can create a conflict - I did it with a SUBST command to create a drive letter to point to a subdirectory and apparently the camera software doesn't check for a drive letter made this way.
2007-06-18 15:18:28 · answer #1 · answered by Mike1942f 7 · 0⤊ 0⤋
go back to the beginning. Unplug everything. Forget you know all about it and have been doing it for ages now RTFM
(read the freakin' manual) do a step by step follow the manual and reinstall everything you might have overlooked a simple step for movies rtfm fixes a multitude of problems
2007-06-18 22:21:04 · answer #2 · answered by fuma74 2 · 0⤊ 0⤋
I believe that you can download drivers for your computer that help your computer to recognize the device. And sometimes when you switch the slot that it was plugged into, you have to start the driver over again.
You can find most of the drivers for free online.
2007-06-18 22:15:05 · answer #3 · answered by Anonymous · 0⤊ 0⤋
call the geek squad
2007-06-18 22:15:07 · answer #4 · answered by lilc246 2 · 0⤊ 0⤋