how to fix a surfboard?

Question

It has several holes in the bottom. They range from the size of a quarter coin to the size of a baseball. I plan to use foams from a discarded surf board to fill the holes. What should I mix it w/ and what r the procedures?

Answer 1

well
im not an expert
but i suggest
if a part is broken off, you can repair it with super blue
or you can get the plaster stuff they put on surf boards and mold it back on
if you need it cleaned
then you can shave off the excess on top of the surfboard
with a clean knife
or you can buy a flat knife that does that for you

Answer 2

are they holes or dents? small repairs are pretty easy to make if you have a little bit of knowledge into the materials that you're working with but larger repairs, i.e. replacing foam might not be something you want to tackle on your own. generally you cut out the bad section and secure a new piece of foam into the hole, shape the new piece to match the contour of the board and re-glass over the seams. sometimes it's a little easier to think of it in terms of foam and fiberglass repair rather than surfboard repair....the board you're trying to fix might not even be worth repairing. if there are several holes and they are on the bottom you could have water damage to the blank and you might have a delamination problem as well. too hard to assess without an actual picture of the problem

Answer 3

hello I had this situation agest in the past.. i replaced into wearing my board domicile after surfing and that i had a brilliant decrease into it :/ from hitting the rocks until now hand. yet I purely further some specific glue from the surf save and purely sanded that down and now its good as new ^^. yet your dent like 5 cases greater effective than what mine replaced into LOL bypass get a expert to do it.

Answer 4

You don't say whats wrong, how can we advise you? give more details.