Most of what I have seen online indicates on te computer module but there are several locations noted for this as well. Any ideas?
2007-06-15 12:44:33 · 5 answers · asked by Scott S 1 in Cars & Transportation ➔ Car Makes ➔ Ford
Open the right/rear door. Pull the on-body rubber weatherstrip out, around the rear side of the door closure. Fold the right/rear seatback down into the locked position to facilitate access to the right/rear seat belt anchor. Carefully pry the upper plastic panel that houses the height adjuster and seat belt anchor off the body taking care not to damage the panel. Now pry the lower panel outward just far enough to enable access to the Vehicle Security Module, where you'll see three electrical connectors plugged into it, coloured green, grey, and blue. On the module will be a series of digits on a label similar to 4L2T-15K602-EB. Beside those digits are five numbers. Those five numbers are the keyless entry keypad code. Hope this helps.
2007-06-15 13:01:11 · answer #1 · answered by Ford Goddess 6 · 2⤊ 0⤋
I have an older ford with keyless entry and there is a sticker in the decklid with the keyless code.....maybe check in the glove box or liftgate...
2016-04-01 09:59:26 · answer #2 · answered by Anonymous · 0⤊ 0⤋
If you have access to a scan tool that can communicate with the vehicle security module, you can retrieve the permanent factory code from it without much effort.
2007-06-15 15:44:42 · answer #3 · answered by Bruce G 3 · 0⤊ 0⤋
Call Ford Customer Service
Verify you account and key way will be released
2007-06-15 14:45:44 · answer #4 · answered by Michael M 7 · 0⤊ 1⤋
drivers rear jack storage compartment, look up inside towards seats. Number is on top of module.
2007-06-15 12:50:03 · answer #5 · answered by Anonymous · 0⤊ 1⤋