its a 2.2 with 1 gig memory and windows xp pro service pack 2 any help would be great thanks all
2007-06-05 19:04:51 · 6 answers · asked by gina m 1 in Computers & Internet ➔ Hardware ➔ Desktops
WISH I KNEW
SORRY
2007-06-05 19:08:35 · answer #1 · answered by john 2 · 0⤊ 0⤋
Assuming u went through the manual that came along and found nothing, here is how you do it.
Try checking the website of the mainboard to see if it supports SATA 1 or SATA 2. If only SATA 1 is supported then go for a 160GB HDD @ 7200RPM ; if both are supported or only SATA 2 is supported then go for either a 250 GB or 320GB HDD @ 10000 RPM. Please donot install HDD any larger than this as it will adversely affect the performance of the 5415WM.
2007-06-06 02:15:29 · answer #2 · answered by Fidel Castro 2 · 0⤊ 0⤋
Go to Bios by pressing F2 Key or DEL Key when booting.
Check for drive configuration if u press enter u can find the size of the hard disk
.
2007-06-06 02:17:30 · answer #3 · answered by Mohamed Kaleel 2 · 0⤊ 0⤋
well harddrives are all preety much the same size so you can put as big of a hard drive as you can afford
but you want to make sure your comp can run to hard drives
by the way you described it it sounds like it should be able to
2007-06-06 02:10:01 · answer #4 · answered by bassofwar 2 · 0⤊ 0⤋
you can put the biggest hard drive you can find with no problems
2007-06-06 02:09:09 · answer #5 · answered by Carling 7 · 0⤊ 0⤋
go into the bios
it may tell you there
or try belarc
http://www.belarc.com/free_download.html
2007-06-06 02:11:20 · answer #6 · answered by Anonymous · 0⤊ 0⤋