How can I break a glass piggy bank without a bunch of splinters. Just a clean break?

Answer 1

Below are two links that inform you on how to break glass. I hope this helps. :)

Answer 2

It will depend upon what the bank is made of. If it is glass, use a glass cutter about the head, circumferentially,--you have to do this fast--then tap it fairly hard with the ball end of the cutter.
If the material is plastic or ceramic, then use a sharp knife or razor cutter and perform the above about the head, but this time hit the head against a wooden object like a chair seat or arm holding the body in your hand.
Either way you should have no shards.

Answer 3

Assuming there's no longer a plug on the backside, you could carry it the different way up so the coin slot is squarely dealing with the floor and you are going to be able to stick a fingernail report/ skinny nail board (i'm a guy, so i do no longer the surprising term for it) or a tongue depressor in the slot and pass it up and down. this could turn the money so can fall out of the slot. this is tiring and time eating and can desire to you take a wreck now and back so which you don't get so drained which you by twist of destiny drop the piggy economic employer.

Answer 4

There is one method of doing this is that just wrap it by a thread and than poor some burning matterial such as alchole
and match it or use a lighter.

Answer 5

I'd use a diamond cutting disk on a Dremel tool.

Doug

Answer 6

Put in in a thick plastic bag and hit it with a hammer.

Answer 7

You have to cut it with a electric cutter or something like that

Answer 8

use diamond cutter.