I had a compaq computer for many years and it suddenly stopped working. It turns on but displays a blank screen, and its not the monitor because i tried a different one. Well i bought a new computer, but i want to know if i can somehow retrieve the pictures i have saved on the old computer. I will appreciate the help! thanks!
2007-06-05 10:36:01 · 4 answers · asked by presario_pc 1 in Computers & Internet ➔ Hardware ➔ Desktops
You can put the old hard drive in the new computer.
Just change the jumper to make it a slave drive and the computer should see the drive and allow you to use it as a storage drive. THIS ASSUMES the old hard drive is functional and not the cause of your old computer's problem.
If it works you can delete all the junk on the old hard drive that is no longer needed like Windows etc. and have a good storage unit.
2007-06-05 10:47:38 · answer #1 · answered by Jerry 7 · 0⤊ 0⤋
Put the old hard drive into your current computer as a slave.
You don't need the external enclosure if you do it this way save money, but, you'll need to be comfortable with opening your PC.
Otherwise you can by a USB case at Best Buy for about $40 and attach it as an external drive.
This is assuming that it wasn't the drive that was bad.
2007-06-05 10:46:43 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Yup, it incredibly is extremely easy. basically crack open the tower and have a glance around. interior there could desire to be like a field that the potential runs into. That field could have lots of wires working right into a circuit, it is the mum board. look on the mum board, come across a twine that runs off to a field like concern. this can be the complicated force. look at the way it incredibly is related to the mum board, then take it out. placed it into the recent computing device, and boot it up. that could desire to do it. in case you have any problems with wires interior the recent computing device, basically swap around the complicated drives, then swap them returned as quickly as you have executed your copying to an exterior memory device.
2016-11-26 02:26:07 · answer #3 · answered by kirtsey 4 · 0⤊ 0⤋
You can hook up the machines hard drive to your new computer. They make what is called an 'External Drive Enclosure'. That will turn your old hard drive into an external USB drive so you can read it and copy data from it.
2007-06-05 10:39:46 · answer #4 · answered by hllywood72 5 · 1⤊ 0⤋