where do i put a power cap if i have 2 amps runing through a fused power distribution block, 1 amp powering 2 6"x9"s and 2 5" and the other amp is powering my 15" sub. i think it goes between the inline fuse near the battery and the distribution block but i just need to know for shure b4 i blow myself up.
2007-06-03 12:02:18 · 3 answers · asked by its all about me 3 in Cars & Transportation ➔ Car Audio
will it work if i put the cap b4 the distribution block and have both amps running through it?
2007-06-03 12:34:06 · update #1
I own a shop and I blow myself up all the time. Good luck. Hope this helps.
2007-06-03 12:08:09 · answer #1 · answered by Anonymous · 0⤊ 0⤋
put the cap as close to the sub amp as you can! the cap should be teed off the main power line from the battery and ground the cap to is own ground not with the amps
2007-06-03 19:10:47 · answer #2 · answered by mdmauto 3 · 0⤊ 0⤋
As close to the SUB amp as possible.
2007-06-03 19:07:16 · answer #3 · answered by Mr. KnowItAll 7 · 0⤊ 0⤋