English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

All are in good clean condition that need mechanical repair and it wouldn't be cost effective if repaird and resold. So what else can I do with them instead of useing them for scrap metal.

Any Artistic, Rural, & ECO suggestion's would be of great help !

2007-06-03 11:45:46 · 3 answers · asked by scratch_n_sniff 3 in Science & Mathematics Engineering

3 answers

You could go into "mass production" making these lamps
http://www.makezine.com/blog/archive/2006/07/diy_lamp_from_an_old_washing_m.html
which I think look actually quite cool!
You can contact a pottery club. I know artists who use old washing machines or dryers to build a so-called Raku Oven.
Finally, take them to bits, make sure which parts work, and sell them separately on eBay. Sometimes people are hungry for such hard-to-get spare parts....

2007-06-03 12:04:54 · answer #1 · answered by Marianna 6 · 0 0

Having taken a couple washers apart to repair, I have to say they they are actually remarkably simple machines. Even different brands come apart the same way and have the same 4 or 5 components. The tub, transmission, motor, pump and controls. I bet you could take parts from the 50 and make at least 25 working machines yourself.

I haven't tried a dryer, but I bet you could do the same.

There are web sites that you can google up to tell you how to take them apart and what to look for in an inoperative machine, based on what it doesn't do.

2007-06-03 18:54:27 · answer #2 · answered by campbelp2002 7 · 0 0

I would stop collecting them if I was you ! It is not a good idea to re sell electrical devises unless you are able to offer some sort of test certificate and guarantee. You may find yourself liable. You can maximise the scrap value by breaking up the machines into the different metals before selling but this will take some time.

2007-06-04 14:04:55 · answer #3 · answered by mike the bee 2 · 0 0

fedest.com, questions and answers