The dial on the truck has a setting for A/C and Max A/C. I turned on the normal A/C and hot air was blowing out, when I put it on Max cold air came out as it should. Any ideas why the normal A/C is blowing out hot air?? It worked fine last summer. Thanks.
2007-06-02 05:34:54 · 2 answers · asked by Stuck in the middle of nowhere 7 in Cars & Transportation ➔ Car Makes ➔ Ford
Likely the blend door is broken. When you put it on max a/c, there is a valve that shuts of the coolant flow to the heater core, thus even though the air is going through the heater core, on max a/c position the heater core is cold due to no coolant flow. If you have it on normal a/c you likely have no control over the temperature at all, no matter where you set the temp control, it will blow the same. This confirms a blend door issue, be it broken or the actuator bad.
2007-06-02 14:19:30 · answer #1 · answered by Anonymous · 0⤊ 0⤋
I am thinking it just needs cleaning and a shot of freon . take it to a mechanic and let them do the freon and clean should not be too costly . good luck and happy motoring .
2007-06-02 12:39:07 · answer #2 · answered by Kate T. 7 · 2⤊ 0⤋