2007-06-01 19:29:35 · 7 answers · asked by amjad 1 in Science & Mathematics ➔ Engineering
The two unknown pieces of information are the voltage and whether this is single-phase or three-phase load. I will provide formulas for both and you can plug in the appropriate voltage.
100 kVA = 100,000 VA
Single phase:
volts * amps = 100,000 VA.
100,000 VA ÷ volts = amps
For three-phase, we need to add in the √3. The voltage you enter in the formula will be the phase-to-phase voltage. Not phase-to-neutral.
Three phase:
volts * amps * √3 = 100,000 VA
100,000 VA ÷ (volts * √3) = amps
Below are two examples assuming single phase 240V and three phase 480V.
Single phase @ 240 V
100,000 VA ÷ 240 V = 417 amps
Three phase @ 480 V
100,000 ÷ (480 * √3) = 120 amps
You should be able to alter these equations using your actual voltage.
Good Luck.
P.S. Lord was close, but he mixed up kVA and kW. If you know the kVA, you don't need the power factor. kVA * PF = kW.
2007-06-02 01:49:00 · answer #1 · answered by Thomas C 6 · 1⤊ 0⤋
Kva To Amp
2016-10-31 14:20:47 · answer #2 · answered by ? 4 · 0⤊ 0⤋
These units are incompatible so there is no direct conversion. However if you have a voltage then to convert from power to current just divide it by the voltage.
Example, if you had 110V then the amps would be 100000/110=909A
2007-06-01 19:43:57 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Kva Conversion To Amps
2016-06-25 02:31:36 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Well to someone else that is kinda strange but if you enjoy doing things like that well that'ss ok (I have a Q if shes changing your "diaper" is sheseeingn a little more of you then most people would want to see)but um personally that is kinda weird for her to want to do that unless she's hintingng she wants a baby.....but I don't know what you guys relationship is so yeah.
2016-03-19 01:55:36 · answer #5 · answered by Anonymous · 0⤊ 0⤋
100 kva 3phase to380 volta
2015-03-14 04:12:55 · answer #6 · answered by Larry Martinez 1 · 0⤊ 0⤋
it depends on three things.
power factor
operating voltage
single phase or three phase circuits.
so
KVA= VOLT* AMPERE*POWER FACTOR ( single phase circuits)
KVA= 1.73* VOLT*AMPERE*PF
pf= CONSIDER IT AS 0.8 or 0.85
operating voltage is smthg that can be known easily. and it is a standard world wide.
110 or 220, single phase
190 or 380 three phase
this is for the low voltage utilization.
2007-06-01 20:11:07 · answer #7 · answered by lord 3 · 0⤊ 2⤋