I want to connect my amp to my cd player and I want to know how to take out my kenwood cd player.
2007-05-31 14:14:12 · 4 answers · asked by eldub 1 in Cars & Transportation ➔ Car Audio
So you've already got an aftermarket (Kenwood) stereo installed? It should come out quite easily. Just pop off the outer trim, pull out the plastic mounting bracket that's holding the deck in, and the stereo should come out with it. There's really not much holding it in, it's basically just wedged in the hole. (I've got an 01 Cougar and have replaced the stereo twice, btw).
2007-05-31 23:07:04 · answer #1 · answered by nevergonnaletyoudown 4 · 0⤊ 0⤋
Yep. there replaced right into a hatch fixed changer obtainable as an option, that makes use of a cartridge to hold six ( i think of ) CD's. The production unit wiring is probable on your vehicle, in simple terms pushed at the back of a panel someplace. verify e-bay for a used changer. you could probable plug it in to the harness, drop in a cartridge of CD's, & have music in a jiffy. make valuable the used on has the production unit mounting brackets with it.
2016-12-12 07:59:11 · answer #2 · answered by jaffe 4 · 0⤊ 0⤋
Go to AutoZone & spend $2.95 for the removal tool. Instructions are in the package.
2007-05-31 14:55:54 · answer #3 · answered by schizophreniabeatsdiningalone 5 · 0⤊ 1⤋
Go to crutchfield.com
Input your car in vehicle outfitting.
Go here.
http://www.crutchfield.com/S-jXqK70ulCyT/cgi-bin/ProdView.asp?search=master+sheet&i=700MASTER
Buy for $5
Ask to e-mail as well as send you it. You will have detailed instructions within a few hours.
2007-05-31 14:25:25 · answer #4 · answered by thesandstereo 4 · 0⤊ 1⤋