I need to know the correct order to place these pedals in the pedal chain, starting with the guitar and ending with the amp-
Digitech RP100 (multi-FX)
Digitech DM (Distortion)
Behringer EQ700 (Graphic Equaliser)
Behringer Hellbabe (Wah pedal)
2007-05-28 06:44:34 · 6 answers · asked by Skull 4 in Entertainment & Music ➔ Music ➔ Other - Music
The instructions give no indication as to the correct placement in the chain.
2007-05-28 06:49:23 · update #1
Their isn't much control over distortion on the RP100, and no, it doesn't have the DM. It doesn't have any for that matter.
2007-05-29 06:43:06 · update #2
There is no given order in the chain. All of the devices have in/out or through jacks that enable YOU to select your own customized order in which you want to lay them out. As long as all the pedals (and cables) are working, it's a piece a cake!
Rock On! ♪
2007-05-28 06:55:38 · answer #1 · answered by -:¦:-SKY-:¦:- 7 · 1⤊ 0⤋
EQ first, Wah last. Others are up to you. Why do you use a separate distortion pedal? Doesn't the RP100 have the same distortions?
2007-05-28 08:14:50 · answer #2 · answered by PJH 5 · 0⤊ 0⤋
i would go, distortion, then wah then graphic then your rp100 last (thats a multi effects digital unit)
That way you can switch the first 3 off when needed and just use the digital effects or vice versa.
2007-05-28 07:00:08 · answer #3 · answered by just-dave 5 · 1⤊ 0⤋
You should refer to the instruction book for the pedals.
2007-05-28 06:47:50 · answer #4 · answered by julie 6 · 0⤊ 1⤋
guitar>tuner>volume>micro amp>volume pedal>ds-1>dd-3>bbe>amp you always want the tuner first because it needs a clean signal to be accurate. nice selection.
2016-05-19 23:11:32 · answer #5 · answered by manda 3 · 0⤊ 0⤋
question a pro at a guitar center for that.
2007-05-28 07:40:58 · answer #6 · answered by cadaholic 7 · 0⤊ 1⤋